Category Archives : Mold Services

Two Important Reasons to do a Mold Inspection

Mold is found just about everywhere, but when it is found in your home it can be dangerous to the health of everyone in your home. Mold can occur in a house because of flooding. Flooding can be caused by a broken water pipe or hose, or it can be caused by torrential rain, such as a hurricane or tropical storm.

Flooding is not the only cause of mold. One of the most common places homeowners find mold is in the basement. The reason for this is because basements are usually dark and damp, the perfect environment for mold to grow in. If the mold finds plenty of cellulose to feed upon along with moisture, it will grow, and can grow so much that it invades other parts of your home. Therefore getting a mold inspection can be important to either finding mold, or giving you peace of mind.


Reason One – Health

Mold is known to be toxic in high levels. At low levels, mold causes a variety of health problems for most people. Common health problems include chronic coughing, throat irritation, headaches, and nausea. It is critical that people who have mold allergies not be exposed to mold for prolonged periods of time to prevent serious or severe health problems.


wrecked homeReason Two – Damage to Your Home

Mold can spread through your home very fast. Unfortunately, most people don’t see the mold as it grows because it often grows behind walls where it isn’t visible. By the time the mold has spread through the inside of a wall to the outside, the damage it has caused can be too excessive to be repaired. Dry rot can cause damage to the integrity of your home’s frame.

Mold inspections are the easiest way to find out if there is mold in your home, and if there is, where the mold is located. After you have a mold inspection done the inspector will discuss the results with you. The best case scenario is that you don’t have mold, or the mold is minor. If, however, you find that you have a lot of mold in your house the inspector can be a great resource for learning about who you can turn to for getting rid of the mold, as well as repairing the damage caused by mold. If you ever suspect that you may have mold, contact a mold inspector right away at so that you can deal with the problem before it gets worse. You can find some additional reason by visiting this website.

Continue Reading

Best Tips For Mold Removal And Remediation

Mold resides in moist conditions and thrive in such habitats. If there are cracks and/or leaks present in the home’s structure, it can lead to the development of mold. It is important to not let the mold thrive and continue to spread as this can be damaging to your health. Not only is it bad for the health, it can lead to structural damage the longer it is present. Let’s take a look at important tips to consider when looking to get rid of the mold.

The First Step Is To Find The Source

moldremFixing the issue permanently requires the home owner to go ahead and find the source of the issue. It is the root cause that has to be fixed not the mold itself. If the mold is removed without taking a look at the root cause, it will simply develop again and leave you back where you started.

Plumbing leaks are the number one source for these issues. Also, check for cracks in the wall where water could be leaking in. These are two places where mold will often be found because of the nice, moist conditions that are in place for growth. You can also hire a company, which is a good idea for a mold inspection completed. Get more assistance and help on mold removal and a free mold removal estimate at

Antimicrobial Treatment

Removing the mold and scrubbing it off is only part of the solution. It is important to spray in an antimicrobial treatment to ensure the mold does not come back. The preventative measures that have to be used are critical in this process. Anyone that is searching for results has to make sure they are paying attention to the type of treatment being sprayed to prevent further growth.

There are a range of brands that can be used and they can easily be found at the local store. In basements, it is often recommended to spray the entire room with this treatment instead of select spots.

These are two of the most important tips to consider when looking to get rid of mold that has developed inside the home. This mold has to be removed as soon as possible otherwise it could cause a lot of unnecessary damage. All it takes is 48 hours for the mold to start spreading after it has formed. It is pertinent for the home owner to act quickly and begin the process of removal right away. This is the only way of making sure the mold is taken care of before it causes significant short and long-term damage to the property and its inhabitants.

Continue Reading

The Ins And Outs Of Mold Inspections

Important Aspects Of A Proper Mold Inspection

Mold inspections are employed to detect the presence of mold within a property and see what the source of the problem is. A lot of home owners get mold inspections done in order to remain on the safe side. Mold inspectors are trained to find mold that is lingering around and could potentially harm the inhabitants of the property. It is a safe option for those who want to be sure they are not living in the presence of mold. Upon inspection, the mold inspector will highlight where the mold is and what is causing the problem.

Visible and Invisible Growth

black_mold_growing_from_water_leakHome owners will often notice the obvious signs of mold growth, but miss the ones that are lingering underneath places where the naked eye cannot reach. With modern equipment, a mold inspector is able to pinpoint invisible growth that might be in places that are tough to reach.

It is the invisible mold that is most difficult to pinpoint and in most cases it can only be found by a professional. It is this type of mold that can do the most harm as it is difficult to spot and can thrive for months before being spotted.

Special Equipment For Mold Inspections & Removal

A DIY mold inspection is never going to cut it when looking for hidden mold. It is also impossible to pinpoint the difference between mold and other sources. This is why its important to hire a company like Action 1 Restoration for your mold inspections and removal.

Mold inspectors are equipped with special equipment which makes it easier to spot leaks and/or cracks present in the property. These include places hidden behind the walls.

The special equipment include pieces such as fiber optics and moisture meters which are able to sense the presence of leaks and mold in general. These tools ensure the mold inspector is able to pinpoint the problem as soon as possible.

A mold inspection is critical on a regular basis to ensure the property is secure and fine for the inhabitants to reside in. It is also important for spotting potential issues which could cause mold to form down the road if the problem is not resolved. Hiring a mold inspector to have a look is a safe option to consider for those who are worried about the presence of the mold in the home. The mold inspector is able to pinpoint the problem and help guide the home owner in the right direction for getting rid of the mold properly.

Continue Reading